Croatia Beipu devices buying advice, pro (Hcigar Akso)
Beipu devices advice for Croatia, covering comparison, what to look for and where the trade-offs actually sit.
The gap between a mid-range and a premium beipu devices narrows once you know which components you actually use. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Most Croatia buyers start with a well-known brand name and then discover that fit and coil availability matter far more. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Vapour production is more than adequate at 70, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
Charging over USB-C takes about 70 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the USB-C socket on the base and whether the 0.15 Ω dual mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 5000 mAh cell holds a usable charge for most of a day at 70 and recharges over USB-C.
Comparing this against a 60:40 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1743 full puffs from a charge at 12 mg/ml, based on average session length in our testing.
Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. The Stealth Grey finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Expect roughly 1743 full puffs from a charge at 12 mg/ml, based on average session length in our testing.
Replacement coils are widely available, and the 0.15 Ω dual mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 0.15 Ω dual mesh coil changes the draw character compared with the 60:40 PG/VG liquid sitting in the chamber.
Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below. For diy mixers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | RELX Pro |
|---|---|
| Brand family | Hcigar |
| Battery capacity | 5000 mAh |
| Power range | 70 W |
| Liquid capacity | 1.6 ml |
| Coil | 0.15 Ω dual mesh |
| Bottle size | 0.6 ml |
| Liquid ratio | 60:40 PG/VG |
| Nicotine strength | 12 mg/ml |
| Material | anodised aluminium |
| Charge port | USB-C |
| Connector | 510 bottom pin |
| Airflow | dual bottom |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Lemon Lime Soda: citrusy, crisp, described as zesty lemon over lime with gentle carbonation. On a 60:40 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.15 Ω dual mesh mark before the coil begins to mute it.
Practical considerations in Croatia
Availability in Croatia is the factor that decides most outcomes here. Confirm the 0.15 Ω dual mesh and the USB-C are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.